Test Silicon wafer
12" Test Grade Silicon Wafer — Particles ≤ 50 @ ≥ 0.065μm
Product Introduction:
Our 12" (300mm) Test Grade Silicon Wafer with a particle specification of ≤50 particles at ≥0.065μm sits among our finer-threshold grades,built for users who need a noticeably cleaner surface than standard test wafers. Grown by the Czochralski (CZ) method as a P-type,boron-doped <100> wafer with 1–100 Ω·cm resistivity, it combines a tightly controlled particle level with the consistent geometry needed for repeatable results. It is a practical step up from the 0.09μm grade for teams qualifying equipment and monitoring processes with stricter cleanliness requirements, without moving to our most demanding grades.
12" Test Grade Silicon Wafer — Particles ≤ 50 @ ≥ 0.045μm
Product Introduction:
Our 12" (300mm) Test Grade Silicon Wafer with a particle specification of ≤50 particles at ≥0.045μm applies one of the finer detection thresholds in our test-grade range, designed for users who cannot afford surface contamination to skew their results. Grown by the Czochralski (CZ) method as a P-type, boron-doped <100> wafer with 1–100 Ω·cm resistivity, it pairs a tightly controlled particle level with consistent geometry for repeatable, reliable data. It suits equipment qualification and monitoring on advanced, cleanliness-sensitive tools, and is a natural step up from the 0.065μm grade.
12" Test Grade Silicon Wafer — Particles ≤ 50 @ ≥ 0.12μm
Product Introduction:
Our 12" (300mm) Test Grade Silicon Wafers with a particle specification of ≤50 particles at ≥0.12μm provide a dependable, cost-effective option for everyday testing needs. Grown by the Czochralski (CZ) method, these P-type, boron-doped wafers feature <100> orientation, 1–100 Ω·cm resistivity, and a thickness of 775±25μm. Polished on both sides, they offer surface roughness of Ra ≤1nm, TTV ≤10μm, and warp/bow ≤40μm,with surface metal contamination held at ≤1E10. Consistent geometry and a controlled particle level make them a practical choice where repeatable results matter more than the tightest cleanliness grade.Each wafer is produced to consistent specifications to support stable,batch-to-batch performance.
12" Test Grade Silicon Wafer — Particles ≤ 50 @ ≥ 0.09μm
Product Introduction:
Our 12" (300mm) Test Grade Silicon Wafers with a particle specification of ≤50 particles at ≥0.09μm apply a finer detection threshold than the 0.12μm grade, offering a cleaner surface for more demanding testing needs. Grown by the Czochralski (CZ) method, these P-type, boron-doped wafers feature <100> orientation, 1–100 Ω·cm resistivity, and a thickness of 775±25μm. Polished on both sides, they offer surface roughness of Ra ≤1nm, TTV ≤10μm, and warp/bow ≤40μm, with surface metal contamination held at ≤1E10. The tighter particle limit helps reduce contamination risk when running on cleaner tools and chambers.Each wafer is produced to consistent specifications to support stable,batch-to-batch performance.
12inch 300mm DSP Test Grade silicon wafer
Product Introduction:
The Core Consumable for Leading-Edge Manufacturing
The 12-inch Silicon Test Wafer is your entry ticket to the top tier of semiconductor manufacturing, integral to everything from nano-scale pilot process R&D to high-volume production. The value of these wafers lies not only in the product itself but in the extreme technical standards and stability they represent. Through our deep collaboration with leading Japanese silicon manufacturers, we offer test products that achieve industry-leading performance in global flatness, nano-level surface particle control, and mechanical properties.
They are essential for the most advanced process development, daily monitoring and calibration of multi-million-dollar fab equipment, and periodic maintenance to ensure high production yields. Choosing us means selecting a stable and trustworthy long-term partner for your most critical manufacturing operations.
8inch 200mm SSP/DSP Test Grade silicon wafer
Product Introduction:
Precision Platform for Advanced Process Development
This 8-inch Silicon Test Wafer is engineered for more advanced semiconductor manufacturing processes. It serves the development of new technologies, new tool qualification, and the monitoring of critical process modules, demanding lower defect densities, superior crystal quality, and enhanced thermal stability from the wafer substrate. We enforce stricter quality standards for this category, with products for high-end applications directly linked to our Japanese manufacturing partners to meet the most cutting-edge testing requirements.
Whether used for advanced lithography calibration or the evaluation of new materials like low-k dielectrics and high-k metal gates, this test wafer provides a pure and stable base, acting as a reliable partner in your technology migration and process exploration.
6inch 150mm SSP silicon wafer
Product Introduction:
The Balanced Workhorse for Production Line Monitoring
As a vital consumable for mainstream production lines, our 6-inch Silicon Test Wafers offer the optimal balance between cost and performance. They are widely used in semiconductor fabs for chamber conditioning, film uniformity checks, and CMP process debugging. This product guarantees excellent lot-to-lot consistency and superior surface flatness, ensuring your monitoring data is accurate and reliable for maintaining line stability and yield.
We understand the critical importance of a stable supply chain for production. Leveraging our dual manufacturing bases in China and Japan, we can flexibly allocate resources to ensure a continuous and stable supply of these test wafers, supporting the seamless operation of your production activities.
4inch 100mm SSP silicon wafer
Product Introduction:
Cost-Effective & Reliable for Diverse R&D Needs
Our 4-inch Silicon Test Wafers are the ideal choice for academic labs, R&D centers, and production lines for daily process monitoring and equipment maintenance. Their cost-effective nature makes them particularly suitable for training, high-consumption cleaning steps, new equipment calibration, and routine deposition/etch rate tests. We ensure high consistency in surface characteristics and electrical parameters within the same batch, providing a stable and reliable foundation for your data collection.
This product line can be supplied with various films, including oxide, nitride, and polysilicon, to meet diverse process qualification needs. Select high-specification polished wafers are sourced from our partnered Japanese facilities, renowned for their exceptional quality control, offering extra assurance for your critical applications.
High-Quality DSP/SSP 2-12 inch Test grade Silicon Wafer for semiconductor applications
Product Introduction:
FSM can provide dummy wafers in various sizes from 2 inches to 12 inches, with our own factory to ensure the stable quality and controllable delivery time. We also have various testing equipment to provide parameter testing services as needed.

