| Wafer Material Definition |
Monocrystalline silicon wafer with a silicon nitride (Si3N4) film, or a silicon nitride membrane wafer when specified for MEMS applications |
The purchase order clearly identifies substrate material, Si3N4 layer purpose, deposition method, and application |
“Silicon nitride wafer” can describe different products; precise definition prevents unsuitable quotations and delayed qualification |
| Standard Wafer Diameter |
100 mm, 150 mm, or 200 mm; 300 mm is available for selected high-volume semiconductor processes |
Diameter tolerance, notch or flat orientation, and edge exclusion are documented before production |
Matching the existing equipment avoids cassette, chuck, mask, and handling-system incompatibility |
| Substrate Thickness |
Common silicon thickness ranges: approximately 300–700 µm, depending on wafer diameter and application; membrane products require a separately defined support thickness |
Average thickness, thickness variation, and local thickness variation are measured using calibrated equipment |
Thickness affects handling strength, thermal behavior, focus settings, and downstream yield |
| Silicon Nitride Film Thickness |
Approximately 20 nm to 2 µm for common process wafers; membrane thickness is application-specific and may be much thinner |
Thickness mean, within-wafer uniformity, wafer-to-wafer repeatability, and measurement method are reported |
Film thickness determines stress, etch time, dielectric performance, and barrier effectiveness |
| Deposition Method |
Low-pressure chemical vapor deposition (LPCVD), plasma-enhanced chemical vapor deposition (PECVD), or alternative qualified process |
Deposition method, process temperature, film composition, hydrogen content where relevant, and stress data are supplied |
Different methods produce different film stress, density, conformality, and thermal budgets |
| Film Stress |
Typical target depends on application; low-stress nitride may be required for membranes, while tensile or compressive films may be selected for passivation |
Stress value and sign are measured using wafer-curvature methods; limits are agreed before shipment |
Uncontrolled stress can cause wafer bow, membrane rupture, pattern distortion, or delamination |
| Surface Finish |
Single-side polished, double-side polished, or textured surface according to process requirements |
Surface roughness, scratches, stains, haze, particles, and edge damage are inspected under defined lighting and magnification |
Surface condition influences lithography, bonding, coating adhesion, and optical or electrical performance |
| Flatness and Bow |
Set a project-specific maximum for total thickness variation, bow, and warp; semiconductor process requirements are generally tighter than laboratory requirements |
Full-wafer mapping is preferred, with results traceable to calibrated metrology |
Poor flatness can reduce lithography focus margin and cause vacuum-chuck or bonding problems |
| Electrical Properties |
Specify silicon resistivity, conductivity type, orientation, and Si3N4 dielectric requirements separately |
Resistivity, carrier type, crystal orientation, and dielectric leakage or breakdown requirements are verified when applicable |
Electrical mismatch can invalidate device models and create inconsistent process results |
| Crystal Orientation |
Common silicon orientations include (100) and (111); orientation should be selected according to etching, oxidation, and device design |
Orientation, miscut angle, and notch or flat direction are recorded on the inspection report |
Crystal orientation affects anisotropic etching, interface behavior, and alignment |
| Particle and Defect Control |
Use a particle-size threshold and maximum defect count appropriate to the process node and inspection capability |
Particle scan, visual inspection, pinholes, film peeling, cracks, edge chips, and haze are included in the quality plan |
Defect density directly affects usable die count and process yield |
| Cleanliness and Packaging |
Cleanroom handling with compatible wafer carriers, sealed bags, desiccant where required, and protective labels |
Packaging integrity, particle control, lot identification, and moisture exposure are checked before dispatch |
Improper packaging can introduce contamination even when the wafer passed final inspection |
| Quality Documentation |
Certificate of conformance, lot record, inspection report, material declaration, and process-change notification procedure |
Documents identify lot number, quantity, specifications, test methods, inspection date, and authorized release status |
Complete records support incoming inspection, audits, traceability, and customer qualification |
| Standards and Compliance |
Reference applicable SEMI specifications, ISO 9001-based quality systems, cleanroom controls, and destination-country import rules |
The supplier states the exact standard revision and identifies any deviations or customer-specific controls |
Clear compliance requirements reduce customs issues and differences between supplier and buyer measurements |
| Sample and Qualification Plan |
Request engineering samples before volume release; evaluate film thickness, stress, roughness, bow, particles, and process yield |
Use agreed sample size, acceptance limits, test coupons, and a written approval process |
Qualification reduces the risk of committing to a large lot that fails downstream processing |
| Lead Time Planning |
Allow time for quotation, sample preparation, testing, qualification, production, final inspection, and international transit |
The confirmed schedule includes manufacturing lead time, inspection hold points, dispatch date, and contingency time |
Custom film thicknesses and low-volume specifications generally require more planning than standard stock items |
| Shipping and Incoterms |
Agree the Incoterm, carrier responsibility, insurance, customs documents, delivery address, and temperature or vibration precautions |
Shipping documents match the commercial invoice, packing list, lot identifiers, and import classification requirements |
Defined responsibility limits disputes over freight damage, customs delays, and delivery costs |
| Incoming Inspection |
Verify quantity, package condition, wafer diameter, orientation, thickness, film characteristics, visible defects, and documentation |
Inspection results are compared with the purchase specification and retained by lot |
A defined receiving process identifies nonconformities before wafers enter production |
| Best-Fit Selection by Application |
LPCVD nitride for demanding barrier or membrane applications; PECVD nitride where lower process temperature and flexible deposition are priorities |
Selection is confirmed through application testing rather than price alone |
The technically best wafer is the one that meets the full process window, yield, delivery, and documentation requirements |