inquiry
Leave Your Message

12" Test Grade Silicon Wafer — Particles ≤ 50 @ ≥ 0.12μm

Product Introduction:

Our 12" (300mm) Test Grade Silicon Wafers with a particle specification of ≤50 particles at ≥0.12μm provide a dependable, cost-effective option for everyday testing needs. Grown by the Czochralski (CZ) method, these P-type, boron-doped wafers feature <100> orientation, 1–100 Ω·cm resistivity, and a thickness of 775±25μm. Polished on both sides, they offer surface roughness of Ra ≤1nm, TTV ≤10μm, and warp/bow ≤40μm,with surface metal contamination held at ≤1E10. Consistent geometry and a controlled particle level make them a practical choice where repeatable results matter more than the tightest cleanliness grade.Each wafer is produced to consistent specifications to support stable,batch-to-batch performance.

    Applications

    - Routine equipment qualification and tool conditioning
    - Process monitoring in mature-node and general-purpose fabrication
    - Cost-effective dummy and test runs where a moderate particle level is acceptable
    - Transport, handling, and automation testing for 300mm wafer lines

    Parameter Specifications

    Grow Method Type Dopant Resistivity Ra Orientation Slice Orientation Diameter Tolerance Primary Flat Location
    CZ P Boron 1-100 Ω·CM ≤1nm <100> ±1° 300±0.2mm <110>±1°
    Primary Flat Length Thickness TTV Warp Bow Particle Surface Metals Front Side Backside
    / 775±25um ≦10um ≦40um ≦40um 0.12um@≦50ea ≦1E10 Polished Polished

    Leave Your Message